4AG-5valve LEVIN, TRUENO for AE101/AE111

   
   
 
In the case that the STD cam pulley is to be used (Intake with VVT function) the following information is required: TODA's 4AG20V IN camshaft is based on the AE101 engine, so no extra modifications are required. The AE111 engine (Black head cover) can also use this IN camshaft but may require the following modifications. This is due to the cam dowel pin location on the STD camshaft. The position of the STD cam center angle when used with the STD pulley of the AE111 engine is 120deg. TODA's camshaft center angle become 125deg when used with the STD pulley, this may require the camshaft to be advanced by 5deg. Thoughts wanting to re-time the cam to the manufactures STD central cam timing position, we recommend that you use the two stepped dowel pin (TODA Parts Numbers:14100-111-000 /¥2,000).

This new position of the camshaft advances the timing by the required 5deg (from 125deg up to 120deg as AE111 standard central angle).
4AG (5valve) High Power Profile Camshaft for AE101 / AE111 INTAKE (VVT type)
Part No. Angle Lift Price
14111-101-011 264 8.5 ¥46,000
14111-101-012 264 9.0 ¥46,000
14111-101-021 272 8.5 ¥46,000
14111-101-023 272 9.2 ¥46,000
14111-101-031 288 8.5 ¥46,000
14111-101-033 288 9.2 ¥46,000
14111-101-041 304 8.5 ¥46,000
14111-101-043 304 9.2 ¥46,000
*When installing the cam, check that there is enough piston to valve clearance for the full operating range of the VVT system.
*Cam dowel pin phase angle same as STD AE101.
Cam center angle be based on AE101. (125 deg as cam center angle in default)
4AG (5valve) High Power Profile Camshaft for AE101 / AE111 EXHAUST
Part No. Angle Lift Price
14121-101-011 264 8.5 ¥42,000
14121-101-012 264 9.0 ¥42,000
14121-101-021 272 8.5 ¥42,000
14121-101-023 272 9.2 ¥42,000
14121-101-031 288 8.5 ¥42,000
14121-101-033 288 9.2 ¥42,000
14121-101-041 304 8.5 ¥42,000
14121-101-043 304 9.2 ¥42,000

*Other cam profiles are available, please contact us.